Inspect and load
Check fluids and guards, then load prepared ration evenly into the hopper.
SELF-PROPELLED FEED DISTRIBUTIONRequest a quote: AN-3L / AN-5L →Chat with Sales EngineerRead Operating Instructions ↓
Diesel Three-Wheel Feed Cart
A 25 HP self-propelled feed cart for cattle and sheep farms that need a simple machine for outdoor routes, uneven yards and long feeding aisles. Its hydraulic conveyor meters prepared ration along the bunk while the compact three-wheel chassis remains easy to manoeuvre.
Technical overview
ModelAN-3L / AN-5L
Hopper capacity3 m³ / 5 m³
Engine power25 HP
Overall dimensions4400 × 1550 × 2000 mm / 4400 × 1550 × 2100 mm*
Machine weight1,200 kg / 1,350 kg
Rated feed outputApprox. 60 m/h
DriveHydraulic
DischargeConveyor belt
Discharge height300–500 mm
Engineering advantages
Practical machine advantages
25 HP diesel chassis for outdoor feeding routes and farm yards.
3 m³ and 5 m³ hopper options support different herd sizes.
Hydraulic conveyor provides controlled, even feed distribution.
Three-wheel layout gives a tight turning circle around barns.
Suitable for prepared cattle and sheep rations.
Discharge height can be matched to the feed bunk.
Operating instructions
Recommended operating flow
Follow the supplied machine manual and your farm safety rules. Confirm the ordered configuration before operation.
Approach the feed bunk
Drive slowly and align the conveyor with the required feeding side.
Distribute the ration
Engage the hydraulic conveyor and maintain a steady travel speed for a consistent feed line.
Clean after feeding
Park safely, stop the engine and remove remaining feed from the hopper and conveyor.
Before starting
- Inspect guards, fasteners and working components.
- Confirm fuel, power or tractor connection as applicable.
- Clear people and obstacles from the work area.
Safety essentials
- Only trained personnel should operate the machine.
- Stop and isolate power before clearing a blockage.
- Keep bystanders away from moving and discharge parts.
Daily maintenance
- Remove residual material after each shift.
- Inspect wear parts, hoses and fasteners regularly.
- Lubricate and service the machine according to the manual.
Before ordering
Information needed to match your configuration
Hopper capacity
Engine power
Working requirement
Destination country
Specification
| Parameter | Value |
|---|---|
| Model | AN-3L / AN-5L |
| Hopper capacity | 3 m³ / 5 m³ |
| Engine power | 25 HP |
| Overall dimensions | 4400 × 1550 × 2000 mm / 4400 × 1550 × 2100 mm* |
| Machine weight | 1,200 kg / 1,350 kg |
| Rated feed output | Approx. 60 m/h |
| Drive | Hydraulic |
| Discharge | Conveyor belt |
| Discharge height | 300–500 mm |
Full product gallery
Machine details, loading & working views
Select any image to open a larger view.
Factory to destination
Prepared for export, backed by our factory.
Packing, documentation and export preparation are coordinated before dispatch so your team receives the ordered machine ready for the job.
Export packing
Protective crating and organised loading for international shipment.
Factory production
Assembly and configuration support from the Anlan production base.
Product enquiry
Get a configuration and export quote.
Tell us where the machine will work, your target capacity and destination country. We will confirm the configuration and shipping details.